Profilerr
การตั้งค่า

คำสั่งคอนโซล CS2

🔥 คำสั่งยอดนิยม

sv_cheats 1
client
🔥

On sv_cheats 1

Off sv_cheats 0

alias
default
🔥

Alias a command.

bind
client
🔥

Bind a key.

BindToggle
client
🔥

"Performs a bind ""increment var 0 1 1"""

bot_add
server
🔥

Add a Bot to a random side.

bot_kick
server
🔥

bot_kick - Kicks a specific bot, or all bots, matching the given criteria.

cl_crosshair_t
default
🔥

T-shaped crosshair

cl_crosshaircolor
client
🔥

Change the CS:GO crosshair color with a number of 0-5.0 = Red1 = Green2 = Yellow3 = Blue4 = Cyan5 = Custom RGB Color

cl_crosshairdot
client
🔥

Decide if you want to use a Dot or not for the CS:GO crosshair.0 = No Dot1 = Dot

cl_crosshairgap
client
🔥

Changes the distance between the crosshair lines. Negative values close the gaps.-5 = No Gap5 = Wide Gap

cl_crosshairstyle
client
🔥

Change the CS:GO crosshair style with a value between 0-5.0 = Default (spreads while moving and shooting)1 = Default Static (completely static)2 = Classic (spreads while moving and shooting)3 = Classic Dynamic (spreads while moving and shooting)4 = Classic Static (completely static)5 = Classic 1.6/CS:Source Style (only spreads while shooting)

cl_draw_only_deathnotices
client
🔥

Default: 0
For drawing only the crosshair and death notices (used for moviemaking) Requires sv_cheats 1

cl_drawhud
client
🔥

Hide HUD

cl_interp
client
🔥

Default: 0.03125
Min: 0, Max: 0.5 Sets the interpolation amount (bounded on low side by server interp ratio settings).

cl_interp_ratio
client
🔥

Default: 2.0
Sets the interpolation amount (final amount is cl_interp_ratio / cl_updaterate).

cl_showfps
client
🔥

Show your FPS. To improve your FPS

cl_showpos
client
🔥

Default: 0
Draw current position at top of screen

crosshair
client
🔥

Default: 1

demoui
server
🔥

Toggles the player UI for the demo. With the player UI you can speed up, slow down and skip entire rounds.

disconnect
default
🔥

Disconnect game from server.

fps_max
client
🔥

The fps max launchoption sets the maximum FPS (frames per second) of CS:GO. Replace [amount] with the amount you want to limit your game to. Setting it to 0 ("-fps_max 0") will remove any limit, making your game run at the highest FPS possible.

give
server
🔥

Give item to player.
Arguments:

god
server
🔥

ype "god" to enable the god mode in CS:GO. In this mode you will get no damage.

joystick
client
🔥

Define to use your joystick or not.0 = Disabled1 = Enabled

kick
default
🔥

Kick a player by name.

m_yaw
client
🔥

Controls the sensitivity of the Y-axis (moving to the left and right). The default value is 0.022.

mp_freezetime
server
🔥

Define the duration of the starting freeze timer.

mp_maxrounds
client
🔥

Set the rounds that will be played, 0 = no map change.

mp_restartgame
server
🔥

Define the duration of how long it takes to restart the map.

mp_roundtime
server
🔥

Define the round time, default is 2 minutes.

mp_startmoney
client
🔥

Define the starting money, the default is $800.

mp_warmup_end
server
🔥

End warmup immediately.

name
default
🔥

Default: unnamed
Current user name

net_graph
client
🔥

Show information: fps, ping, tick...

noclip
server
🔥

0 = Disabled1 = Invulnerable and you can fly around the map

playdemo
server
🔥

Play a recorded demo file (.dem ).

quit
default
🔥

Exit the engine.

r_drawothermodels
client
🔥

Choose a value between 0-2 when using the command drawothermodels.This command allows you to see the light blue wireframe of unit models, it also works like a CS:GO wallhack: You can see trough walls and doors.

r_drawviewmodel
client
🔥

Default: 1
Requires sv_cheats 1

rate
default
🔥

Default: 80000
Max bytes/sec the host can receive data

รายการคำสั่ง

// เพิ่มคำสั่งจากรายการ

"ทำไมคำสั่งคอนโซลจึงจำเป็นใน CS2

คำสั่งคอนโซลใน CS2 ช่วยให้ผู้เล่นเปิดใช้งานการเปลี่ยนแปลงหรือการตั้งค่าในเกมได้ทันที สิ่งที่คุณต้องทำคือเปิดคอนโซล (คลิก '~') พิมพ์สิ่งที่คุณต้องการแล้วกดปุ่ม 'Enter' กระบวนการทั้งหมดใช้เวลานานเท่าที่คุณต้องการอ่านประโยคนี้

แม้จะมีคำสั่ง CS2 ถึง 3,057 คำสั่งที่พร้อมใช้งานผ่านคอนโซล แต่การตั้งค่าที่สำคัญที่สุดมีอยู่ในเมนูหลักของเกม ด้านพื้นฐานทั้งหมดที่จำเป็นสำหรับการเล่นที่สะดวกสบาย — วิดีโอ, เสียง, เกม, คีย์บอร์ด/เมาส์, คอนโทรลเลอร์ — ทั้งหมดสามารถปรับได้โดยไม่ต้องสัมผัสคีย์บอร์ด แต่คุณยังคงสามารถใช้คอนโซลของคุณเพื่อคัดลอกและวางรายการการตั้งค่าทั้งหมดของใครบางคน แทนที่จะปรับตัวเลือกต่างๆ ทีละรายการ

นอกจากนี้ยังมีรายการคำสั่งมากมาย เช่น การเพิ่มบอทและการควบคุม การเปิดใช้งานชุดเกราะที่ไม่มีที่สิ้นสุด หรือวิถีกระสุนระเบิด ซึ่งมีความสำคัญต่อการฝึกฝน หรือคุณสามารถใช้เพื่อความสนุกสนานกับเพื่อน ๆ เมื่อคุณเบื่อโหมดการแข่งขันและต้องการอะไรแปลกใหม่

การรวมคำสั่งคอนโซล CS2 ทั้งหมดลงในเมนูการแสดงผลพื้นฐานจะเป็นการสิ้นเปลืองพื้นที่อย่างมากและไม่เป็นมิตรกับผู้ใช้เลย ดังนั้นนักพัฒนาจึงทิ้งตัวเลือกเหล่านี้ไว้สำหรับการกำหนดค่าแต่จะ "ซ่อน" ไว้ในคอนโซล ผู้เล่นขั้นสูงมักจะรู้ประมาณหนึ่งร้อยรายการจากรายการคำสั่ง CS2 ทั้งหมด แต่พวกเขาแค่เกาผิวเผินเท่านั้น เพื่อให้ค้นหาสิ่งที่จำเป็นได้ง่าย เราได้เพิ่มทั้งหมดและจัดกลุ่ม ดังนั้นคุณสามารถค้นหาสิ่งที่จำเป็นได้อย่างรวดเร็วโดยเลือกหมวดหมู่

คำสั่งใดที่ไม่สามารถใช้ในโหมดแข่งขันได้?

ด้วยคำสั่งคอนโซล Counter-Strike ที่หลากหลาย คำสั่งส่วนใหญ่จะถูกใช้เหมือนกับการตั้งค่าก่อนเกม กล่าวอีกนัยหนึ่ง พวกมันถูกตั้งค่าทันทีและแทบไม่ต้องเปลี่ยนแปลง โดยเฉพาะในระหว่างการแข่งขัน

อย่างไรก็ตาม คุณสามารถใช้คลัสเตอร์ขนาดใหญ่ได้ในระหว่างเซสชันการฝึกอบรมเท่านั้น การเปิดใช้งานเริ่มต้นด้วยการพิมพ์ 'sv_cheats 1' ในคอนโซล เปิดเส้นทางสำหรับสิ่งที่ต้องห้ามในโหมดการแข่งขัน ตัวละครง่ายๆ ที่บินไปมาในแผนที่ โหมดเทพ อาวุธไม่จำกัด การวางไข่ที่ใกล้ที่สุดเพื่อทดสอบเวลา วิถีระเบิด และอื่น ๆ อีกมากมายสามารถช่วยได้ในขณะฝึกฝน

กลุ่มคำสั่งอื่นที่ไม่ใช่สำหรับการใช้โหมดการแข่งขันเกี่ยวข้องกับการปรับเซิร์ฟเวอร์ภายในกับเกม ดังนั้น คุณไม่สามารถเปลี่ยนเวลาหยุด เวลาต่อรอบ ขนาดทีม หรือจำนวนเงินเมื่อเล่นการจับคู่อย่างเป็นทางการ

ถึงกระนั้น คำสั่ง CS2 ทั้งหมดที่มิเรอร์ในเมนูเริ่มต้นของเกม (หน้าจอด้านบน) จะใช้งานได้ทุกเมื่อ ดังนั้น คุณสามารถเปลี่ยนรายละเอียดเป้าเล็ง โมเดลมุมมอง การวางแนวเรดาร์ การตั้งค่าเสียงและ HUD ผูกข้อความใหม่ และอื่นๆ อีกมากมายได้อย่างง่ายดาย

คำถามที่พบบ่อย

หากต้องการเปิดใช้งานคอนโซลใน CS2 ให้ทำตามขั้นตอนนี้: เปิดเกม → การตั้งค่า → เกม → เปิดใช้งานคอนโซลนักพัฒนา → ใช่ จากนั้นกดปุ่ม “~” เพื่อเปิดใช้งาน

โดยทั่วไป คุณต้องพิมพ์คำสั่งตรงข้าม สำหรับบางคน หมายถึงการเพิ่มค่าตรงข้าม ซึ่งโดยปกติจะเป็น '1' สำหรับการเปิดใช้งาน และ '0' สำหรับการปิดใช้งาน (เช่น sv_cheats 1 เปิดใช้งานคำสั่ง 'cheat' และ sv_cheats 0 จะปิดการใช้งาน) สำหรับคำสั่งอื่นๆ คุณต้องค้นหาคำสั่งตรงข้าม (เช่น bot_add/bot_kick)

คำสั่งที่ใช้บ่อยที่สุดเกี่ยวข้องกับการปรับอัตราปริมาณเกม ความไวของเมาส์ และการผูก ซึ่งสามารถเปลี่ยนแปลงได้หลายครั้งต่อแผนที่เดียว

คำสั่งคอนโซลแทบไม่มีผลกระทบต่อตัวทักษะ แต่สามารถทำให้กระบวนการเล่นเกมราบรื่นและน่าพอใจยิ่งขึ้น ดังนั้นคุณจึงสามารถฆ่าศัตรูได้มากขึ้น"