CS2控制台指令
🔥最佳指令
On sv_cheats 1
Off sv_cheats 0
Alias a command.
Bind a key.
"Performs a bind ""increment var 0 1 1"""
Add a Bot to a random side.
bot_kick - Kicks a specific bot, or all bots, matching the given criteria.
T-shaped crosshair
Change the CS:GO crosshair color with a number of 0-5.0 = Red1 = Green2 = Yellow3 = Blue4 = Cyan5 = Custom RGB Color
Decide if you want to use a Dot or not for the CS:GO crosshair.0 = No Dot1 = Dot
Changes the distance between the crosshair lines. Negative values close the gaps.-5 = No Gap5 = Wide Gap
Change the CS:GO crosshair style with a value between 0-5.0 = Default (spreads while moving and shooting)1 = Default Static (completely static)2 = Classic (spreads while moving and shooting)3 = Classic Dynamic (spreads while moving and shooting)4 = Classic Static (completely static)5 = Classic 1.6/CS:Source Style (only spreads while shooting)
Default: 0
For drawing only the crosshair and death notices (used for moviemaking) Requires sv_cheats 1
Hide HUD
Default: 0.03125
Min: 0, Max: 0.5 Sets the interpolation amount (bounded on low side by server interp ratio settings).
Default: 2.0
Sets the interpolation amount (final amount is cl_interp_ratio / cl_updaterate).
Show your FPS. To improve your FPS
Default: 0
Draw current position at top of screen
Default: 1
Toggles the player UI for the demo. With the player UI you can speed up, slow down and skip entire rounds.
Disconnect game from server.
The fps max launchoption sets the maximum FPS (frames per second) of CS:GO. Replace [amount] with the amount you want to limit your game to. Setting it to 0 ("-fps_max 0") will remove any limit, making your game run at the highest FPS possible.
Give item to player.
Arguments:
ype "god" to enable the god mode in CS:GO. In this mode you will get no damage.
Define to use your joystick or not.0 = Disabled1 = Enabled
Kick a player by name.
Controls the sensitivity of the Y-axis (moving to the left and right). The default value is 0.022.
Define the duration of the starting freeze timer.
Set the rounds that will be played, 0 = no map change.
Define the duration of how long it takes to restart the map.
Define the round time, default is 2 minutes.
Define the starting money, the default is $800.
End warmup immediately.
Default: unnamed
Current user name
Show information: fps, ping, tick...
0 = Disabled1 = Invulnerable and you can fly around the map
Play a recorded demo file (.dem ).
Exit the engine.
Choose a value between 0-2 when using the command drawothermodels.This command allows you to see the light blue wireframe of unit models, it also works like a CS:GO wallhack: You can see trough walls and doors.
Default: 1
Requires sv_cheats 1
Default: 80000
Max bytes/sec the host can receive data
指令清单
CS2为什么需要控制台指令?
CS2控制台指令允许玩家即时激活游戏的变更或设置。您只需打开控制台(点击“~”),输入您想要的指令,然后按下“Enter”键。整个过程所需的时间就和您读完这句话一样快。
尽管通过控制台,您可以使用3,057条CS2指令,但最重要的设置始终可以在游戏的主菜单中找到。包括视频、音频、游戏、键盘/鼠标、控制器等所有让游戏体验更顺畅舒适的基本设置都可以在不接触键盘的情况下进行调整。然而,使用控制台可以让您复制粘贴别人的整个设置清单,而无需逐一调整。
游戏存在着对训练至关重要的大量指令,如添加机器人及其控制、激活无限装甲,或手雷轨迹等。又或者,如果您厌倦了竞技模式,也可以利用指令与好友在游戏过程中找点乐子。
将所有CS2控制台指令都包含在基本显示菜单中会极大地浪费空间,而且界面也不美观,因此开发人员将这些配置选项都“隐藏”在控制台。高级玩家通常知道大概一百多条CS2指令,但这仅仅是冰山一角。为了方便找到想要启动的指令,我们添加了所有的指令并将其进行分组,这样您便可以通过选择类别快速找到所需的指令。
哪些指令不能在竞技模式中使用?
CS2控制台指令非常多,其中大部分指令都是关于游戏前设置。换句话说,它们都只需设置一次,很少需要变更,尤其是在比赛期间。
然而,也有相当多指令只能在训练时使用。只要在控制台输入“sv_cheats 1”,即可激活这些指令,为竞技模式打开方便之门。人物轻松飞越地图、上帝模式、无限武器、测试最近出生点、手雷轨道等指令都能在训练时发挥作用。
其他不可用于竞技模式的指令都与调整游戏的本地服务器有关。因此,在进行官方匹配时,您无法更改冻结时间、回合时间、队伍规模或资金数额。
不过,游戏默认菜单(如上图)中的所有CS2指令都可以随时使用。因此,您可以轻松变更十字准星细节、持枪视角、雷达方向、语音和HUD设置、绑定新消息等。
FAQ
要激活CS2控制台,请按照以下步骤操作:启动游戏 → 设置 → 游戏 → 开启开发者控制台 → 是。然后按“~”键进行激活。
基本上,您只需键入相反的指令即可取消。对于某些指令,这意味着添加相反值,通常“1”表示激活,“0”表示取消(例如,sv_cheats 1表示启用“作弊”指令,sv_cheats 0表示禁用)。而对于有些指令,您需要找到相反的指令(例如,bot_add/bot_kick)。
最常用的指令与调整游戏音量、鼠标灵敏度和绑定有关,一般每张地图可以变更多次。
控制台指令对技术本身几乎没有影响,但绝对可以让游戏过程更流畅和更舒适,从而让您轻松杀死更多敌人。